数值调查被动HTR-PM乏燃料干藏系统的热工性能：（Numerical investigation of passive thermal-hydraulic performance of spent fuel dry-storage system for HTR-PM）.pdfVIP

Annals of Nuclear Energy 109 (2017) 135–150 Contents lists available at ScienceDirect Annals of Nuclear Energy journal homepage: www.elsevi /locate/anucene Numerical investigation of passive thermal-hydraulic performance of spent fuel dry-storage system for HTR-PM Bing Wang a,⇑, Jinhua Wang a, Rizwan-uddin b a Institute of Nuclear and New Energy Technology, Collaborative Innovation Centre of Advanced Nuclear Energy Technology, Key Laboratory of Advanced Reactor Engineering and Safety of Ministry of Education, Tsinghua University, Beijing 100084, China b Department of Nuclear, Plasma, and Radiological Engineering, University of Illinois, Urbana, IL 61801, USA a r t i c l e i n f o a b s t r a c t Article history: Passive thermal performance of a separate buffer storage region of the spent fuel Dry-Storage System Received 7 September 2016 (DSS) for High Temperature Reactor-Pebble bed Modules (HTR-PM) is numerically investigated in this Received in revised form 18 December 2016 study. A 1-D thermal-hydraulic model and the corresponding computer code is developed first to study Accepted 9 May 2017 the natural ventilation characteristics of this region, in which the resistance coefficients are examined Available online 22 May 2017 utilizing the Computational Fluid Dynamics (CFD) method. Flow distribution to storage wells are first obtained under different operating conditions, and the well with the highest tot