煤矿瓦斯抽放管网系统的优化管理技术分析-analysis on optimization management technology of coal mine gas drainage pipe network system.docxVIP

内蒙古科技大学硕士学位论文 II Abstract The main contents of this paper is to mine gas drainage pipe network optimization technology. With the comprehensive drainage technologies mature and fully mechanized mining face gas emission are increasing efforts to ensure that the face of production safety in coal mine gas drainage pipe network system and rationality in order to increase the extraction is particularly important. Firstly, the system analyzes the impact of gas drainage pipe network effects of various factors, and to study proposes ways to improve gas drainage rate;s drainage hole and then focusing on the effects of optimal control has been studied for wear layer fabric Kong the seams and fabric holes, drilled in the surrounding coal gas flow to make a mathematical simulation, and the results were analyzed to derive the effect of improving drainage hole method. Combined with practical on Xiaotun mine coal seam gas pressure, seam permeability coefficient on-site measurement, for the present design of drainage method further laid the foundation; using theoretical knowledge combined with field shows the number of measurement to determine the radius of coal seam gas extraction, and by numerical simulation technology to simulate drainage boreholes drilled drainage operations in different times and different under negative pressure, the bottom pumping Lane on borehole as a secondary effect of drainage for the site construction of the mine gas drainage provided guidance theoretical basis; thus proposed site gas extraction application technology, tests to determine the optimal vacuum extraction, gas drainage pipe diameter to guide the optimal use of the calculation. And as a theory, a more comprehensive Xiaotun mine gas drainage pipe network system optimization. Paper needs on-site determination of Xiaotun mine coal seam 6 coal seam permeability coefficient value of 0.326m2/(Mpa2 d)), the gas pressure values 0.95Mpa; and drainage parameters to be optimized, while the use of FLUENT