基于ug齿轮的三维参数化可视化设计.docVIP

基于UG齿轮的三维参数化、可视化设计 安徽工程大学机电学院毕业设计（论文） - PAGE 74 - - PAGE V - 基于UG齿轮的三维参数化、可视化设计 摘 要 渐开线齿轮是机械传动中的常用零件，由于齿形轮廓复杂，其参数化设计困难。本课题主要是基于Unigraphics二次开发平台，应用其UG/Open API、Grip开发工具和VC++6.0开发环境对渐开线齿轮三维参数化造型系统进行了研究。首先在研究了Unigraphics与应用程序的接口UG/Open API的基础上，通过UG本身自带的二次开发工具进行菜单文件的编写、对话框的设计等，并应用GRIP开发语言编写渐开线齿轮的程序；其次研究了UG二次开发工具UG/Open API应用程序框架的创建及其程序代码的添加。 参数化设计改变了传统的产品设计方法和过程，使原有的二维工程图设计的工作量大部分由软件自动控制完成，把设计重点放到结构的优化和创新上，大大提高了产品设计的效率，便于实现产品的系列化，有利于产品的更新换代。用大型的三维软件实现齿轮的参数化造型已成为设计者的迫切需求 关键词：齿轮；参数化；二次开发；Unigraphics Based on the UG gear method of 3D parametric and visual design Abstract Involute gear is a common part of mechanical drives. It is difficult to conduct parametric design due to the complicacy of tooth profile. My paper mainly studies 3D parametric model system of involute gear by the UG/Open API、Grip and VC++6.0 based on Unigraphics secondary development tool. First of all，It is available to carry out the writing of the mnx microsoft foxpro ， the design of dialog box and so on through the development tools carried by UG itself on the basis of the study on Unigraphics and UG/Open API. Besides， the development of language and the programing of involute gear are conducted by the application of GRIP which leads in the idea of parameteric model of involute gear. Secondly， Studied Unigraphics secondary development tool which the UG/Open API for adding application framework and program code . Parametric design has changed the traditional design methods and procedures for products and make the most workload of two-dimensional engineering drawing accomplished by automatic control. The design focusing on the optimization and creativity of structure largely improve the efficency of design， which is good for the achievement of serialization and renewal of products. Nowadays， the designers are in crying need of achieving parameteric model of gear with large 3D software. Keywords: Gear; Parametric ; Development; Unigraphics 目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc 第1章 绪 论