低频小信号功率放大 毕业论文 好！.docVIP

实用低频功率放大器设计 PAGE PAGE 47 -- 实用低频功率放大器的设计 摘要 本课题介绍制作具有小信号放大能力的低频功率放大器，主要介绍其基本原理、内容、技术线路等。本系统是基于(IC)NE5532，(IC)LM1875设计而成的一种低频小信号功率放大器，由直流稳压电源，电压放大级电路，功率放大级电路，带阻滤波电路及数据采集显示模块五部分组成。其主要功能是将10Hz50KHz的低频小信号放大，当输出功率大于5W时波形无明显失真，并将系统的输出功率，直流电源的供给功率和整机效率实时地显示出来。本设计具有低功耗，性价比高，稳定性好，应用广泛等优点。 关键词 ： 功率放大 集成块NE5532 集成块LM1875 集成块AD736 单片机AT89S52 Abstract This task introduce how to make one of bass frequency power amplifier, which can blow up puny signal, and the amplifier’s basic principle, content and the technology. This bass frequency power amplifier is based upon the Integrated block NE5532 and the Integrated block LM1875. It contains five segments such as the voltage-stabilized source, the voltage_ blowup circuit, the power-blowup circuit, the BEF circuit, the data_ collection and data-disposal circuit and so on. This bass frequency power amplifier’s mostly function is blow up the bass frequency puny signal, which has from 50Hz to 50KHz channel. The wave has no evident distortion, when the output-power has overed 5W. This design require display the system’s output-power, the DC’s purvey power and the whole enginery ’s efficiency momentarily . This design has a large number of advantages, such as lowness power, the good capability and the right price, the upstanding stability, the far-ranging application and so on. Keywords: Power Blowup (IC) NE5532 (IC)LM1875 (IC)AD736 MCU AT89S52 目录 TOC \o 1-3 \u 摘要 PAGEREF _Toc7817 I Abstract PAGEREF _Toc18191 II 目录 PAGEREF _Toc25863 III 前言 PAGEREF _Toc25078 1 1、设计分析及技术指针 PAGEREF _Toc20053 2 1.1设计分析 PAGEREF _Toc26784 2 1.2设计技术指标 PAGEREF _Toc8376 2 2.系统设计方案 PAGEREF _Toc13302 3 2.1方案一 PAGEREF _Toc5728 3 2.2方案二 PAGEREF _Toc28324 4 3.方案设计 PAGEREF _Toc11135 6 3.1低频小信号功率放大器电路的框图 PAGEREF _Toc5995 6 3.2低频小信号功率放大器电路原理图 PAGEREF _Toc20958 6 3.3电路内部各框图的工作原理 PAGEREF _Toc14031 7 3.3.1 ±15V +5V稳压电源电路各框图的工作原理 PAGEREF _Toc24141 7 3.3.2 波形变换电路模块的工作原理 PAGEREF _Toc27477 8 3.3.3 前置运放电路模块的工