不饱和聚酯树脂生产工艺研究分析.docVIP

PAGE PAGE 16 不饱和聚酯树脂生产工艺研究 目 录 中文摘要………………………………………………………………………………2 外文摘要………………………………………………………………………………3 1.文献综述……………………………………………………………………………4 1.1 国内外研究进展 ……………………………………………………………4 1.1.1 国外研究进展 ……………………………………………………………4 1.1.2 国内研究进展 ……………………………………………………………4 1.2 研究内容 ………………………………………………………………4 1.3 研究目的及意义 …………………………………………………………5 2．实验部分…………………………………………………………………………5 2.1 主要原料………………………………………………………………5 2.2 实验原理……………………………………………………………………6 2.3 实验方法步骤………………………………………………………………7 2.4 聚酯树脂性能测定方法 ……………………………………………………9 2.4.1 酸值的测定………………………………………………………………9 2.4.2 粘度的测定………………………………………………………………10 2.4.3 软化点的测定……………………………………………………………10 2.4.4 涂膜实验……………………………………………………… 3.分析与讨论………………………………………………………………11 3.1 温度对反应的影响…………………………………………………………11 3.2 时间对反应的影响…………………………………………………………12 3.3 副产物水对反应的影响……………………………………………………13 3.4 产品性能综合评价…………………………………………………………13 4.结论………………………………………………………………………………14 参考文献……………………………………………………………………………15 致谢…………………………………………………………………………………16 主要符号一览表……………………………………………………………………17 不饱和聚酯树脂生产工艺研究 摘要：本文对精对苯二甲酸和新戊二醇等二元醇生成不饱和聚酯的生产工艺进行了研究。实验综合考察了反应时间、反应温度及副产物水对酯化率的影响，实验结果表明：最适宜的反应时间为11h,反应温度为235℃~245℃，副产物水及时排出对反应有利。所得产品外观为浅黄色透明固体，酸值为69.5mgKOH/g，软化点为109℃，粘度为58Po/ 关键词：不饱和聚酯树脂；生产工艺；产品性质 Research of the Production Process of Unsaturated Polyester Resins Abstract：This paper mainly recommended the research of the production process of unsaturated polyester resins which were generated by pure terephthalic acid and neophentyl glycol. The effects of the reaction temperature and the reaction time and the side product on the production process were studied. The results showed that the suitable reaction time was 11 h、the reaction temperature was 235℃~245℃ and the side product，s discharged in time is good to reaction. The appearance of the product is light yellow transparent solid, the acid value is 69.5mgKOH/g, the softening point is 109℃ Key Words：unsaturated polyester resin; production process; product properties 1 文献综述 聚酯是由二元或多元醇和二元或多元酸或酸酐缩聚而成的高