基站测试规范要求及测试原理概览-TDSCDMA幻灯片.pptVIP

TD-SCDMA基站测试规范 TD-SCDMA基站测试 TD-SCDMA基站测试 工作频率 a)1900 – 1920 MHz: Uplink and downlink transmission 2010 – 2025 MHz Uplink and downlink transmission b)1850 – 1910 MHz: Uplink and downlink transmission 1930 – 1990 MHz: Uplink and downlink transmission c)1910 – 1930 MHz:Uplink and downlink transmission Thank you * ? NOKIA FILENAMs.PPT/ DATE / NN Internal Use Only 测试规范 3GPP TS 25.142 发射测试 接收测试 性能测试 测试模式 协议规定BTS信号（时隙，码等）用于发射测试 接收测试使用RMC 同终端测试不同，BTS测试还需要对多载波进行测试 信道号＝频率（MHz）×5 6.2 Base Station Maximum Output Power MS2690A 1. BTS transmits at Pmax. 2. Measure the mean power by MS2690A. Specification: ? ? 2.7dB ATT BTS Tx High Power ATT Parameter Value/description TDD Duty Cycle TS i; i = 0, 1, 2, 3, 4, 5, 6: transmit, if i is 0,4,5,6; receive, if i is 1,2,3. Time slots under test TS4, TS5 and TS6 BS output power setting PRAT Number of DPCH in each time slot under test 8 Power of each DPCH 1/8 of Base Station output power Data content of DPCH real life (sufficient irregular) BTS发射信号 clock trigger 6.3 Frequency Error 1. BTS transmits at Pmax. 2. Measure Frequency Error MS2690A ATT BTS Tx High Power ATT BS class Accuracy Wide Area BS ± (0,05 ppm + 12 Hz) Local Area BS ± (0,1ppm + 12 Hz) Parameter Value/description TDD Duty Cycle TS i; i = 0, 1, 2, ..., 6: transmit, if i is 0, 4,5,6; receive, if i is 1,2,3. Time slots under test TS4, TS5 and TS6 Number of DPCH in eachtime slot under test 1 BS output power setting PRAT Data content of DPCH real life (sufficient irregular) 指标 BTS发射信号 clock trigger 6.4.5 Primary CCPCH power Measure the PCCPCH code domain power in TS 0 Reduce the base station output power by 2 dB, 5 dB and 13 dB, without changing the relative powers of the PCCPCH and the DPCHs, and repeat step (1) for each output power setting. MS2690A ATT BTS Tx High Power ATT Parameter Value/description TDD Duty Cycle TS i; i = 0, 1, 2, ..., 6: transmit, if i is 0,4,5,6; re