dek印刷机手册unpacking instructions.pdf

UNPACKING INSTRUCTIONS INFINITY INTRODUCTION CHAPTER 4 UNPACKING INSTRUCTIONS INTRODUCTION General To ensure the machine is not damaged during transportation certain machine components are removed prior to dispatch, wrapped and packed separately. The machine mounting feet are removed at dispatch and replaced with trans- portation studs, the machine is secured to the base of the transportation box with nuts and washers. The studs, nuts and washers are replaced on the machine assembly by the mounting feet. Unpacking The lids of the transportation boxes are secured with screws. Remove the box lids and the sides of the large box only. Remove all loose items from the boxes. Remove the wrapping from around the machine, remove the loose items from their bags or wrappings. CAUTION RED TRANSIT BRACKETS. Do not remove the red transit brackets attached to the machine until the machine has been moved to its designated position. Machine Ensure the following machine components, removed for transportation are Components complete and correct: NOTE Quantities may vary, depending on customers requirements. Item Yes No Machine Mounting Feet Paste Dispenser Nozzle (if paste dispen