基于VSC三端柔性直流输电技术研究.docVIP

基于VSC三端柔性直流输电技术研究 　　摘 要：依据柔性直流输电技术的独有特点，针对同一网络中连接无源和有源网络的稳定性分析，首先建立换流站数学模型，将abc三相坐标系的模型转化为dq0坐标系，推导出换流站的等效数学表达式，并对其运行原理和工作特性进行理论分析；其次建立dq0坐标系下的电流控制环，通过设计PI控制器控制交流系统和电压源换流器之间的有功功率及无功功率。利用Matlab软件成功对这个三端系统进行模拟，对其性能进行分析，体现三端直流输电系统的灵活性、可控性、智能性等优点。 　　关键词：三端柔性；直流输电；电压源换流器；Matlab 　　DOI：10.11907/rjdk.172484 　　中图分类号：TP319 　　文献标识码：A 文章编号：1672-7800（2018）004-0184-04 　　Abstract：Based on the unique characteristics of flexible HVDC technology， according to the analysis of the stability of the passive and active network connection in the same network， firstly establish the mathematical model of three-phase abc converter， the coordinates of the model into the dq0 coordinate system， equivalent mathematical expressions are derived for converter station， and the operating principle and working characteristics are analyzed. 　　Then， the current loop control loop is established in the dq0 coordinate system， and the designed PI controller is used to control the active power and reactive power between the AC system and the voltage source converter. Matlab software is used successfully to simulate the three terminal system， and its performance is analyzed. It embodies the advantages of flexibility， controllability and intelligence of the three terminal HVDC system. 　　Based on the unique characteristics of flexible HVDC technology， the analysis of the stability of the passive and active network connection in the same network is done. Firstly the mathematical model of three-phrase abc converter is established and the converter model of abc three-phase coordinate system is transformed into dq0 coordinate system of which equivalent mathematical expressions are derived. The operating principle and working characteristcs are analyzed. Then the current control loop is established in the dq0 coordinate system， and the designed PI controller is used to control the active and reactive power between the AC system and the voltage source converter. Matlab software is used to successfully to simu