基于支持向量机光电测量系统畸变校正.docVIP

基于支持向量机光电测量系统畸变校正 　　摘 要： 畸变直接影响光电测量系统的测量效果，为了提高光电测量系统的测量精度，提出基于支持向量机的光电测量系统畸变校正模型。首先对当前光电测量系统畸变校正的研究现状进行分析，指出它们存在的不足以及难题；然后对光电测量系统畸变校正原因进行分析，采用支持向量机建立光电测量系统畸变校正模型，消除畸变对光电测量系统的干扰；最后通过实验对光电测量系统的测量精度进行分析。结果表明，所提模型可以有效抑制光电测量系统畸变带来的干扰，提高光电测量系统的测量精度，是一种性能优异的光电测量系统畸变校正工具。 　　关键词： 光电测量系统； 畸变校正； 支持向量机； 测量精度 　　中图分类号： TN98?34； TP216 文献标识码： A 文章编号： 1004?373X（2017）21?0105?04 　　Distortion correction of photoelectric measurement system 　　based on support vector machine 　　PENG Xiaolei 　　（Xiamen University of Technology， Xiamen 361023， China） 　　Abstract： The distortion affects the measurement effect of the photoelectric measurement system directly. In order to improve the measurement precision of the photoelectric measurement system， a distortion correction model based on support vector machine （SVM） is proposed for the photoelectric measurement system. The current study status of distortion correction for photoelectric measurement system is analyzed to point out the shortcomings and problems of distortion correction， and then the reason for distortion correction of photoelectric measurement system is analyzed. The support vector machine is used to establish the distortion correction model of photoelectric measurement system to eliminate the distortion interference on the photoelectric measurement system. The measurement precision of the photoelectric measurement system is analyzed with experiments. The experimental results show that the model can effectively suppress the interference caused by the distortion of the photoelectric measurement system， and improve the measurement accuracy of the photoelectric measurement system， which is an excellent distortion correction tool for photoelectric measurement system. 　　Keywords： photoelectric measurement system； distortion correction； support vector machine； measurement precision 　　0 引 言 　　?S着光学技术研究的不断深入，出现了许多光学测量设备，其中光电测量系统是一种应用最为广泛的设备[1]。在光电测量过程中，由于多种因素的影响，成像过程不可避免地出现畸变现象，其中成像畸变对光电测量系统的测试精度产生严重影响。对畸变进行及时有效的校正，消除对光电测量系统测量精度的影响