WL3200T压机液压系统的动态仿真研究-化工过程机械专业论文.docxVIP

II II Abstract Automatic Hydraulic Press is a High-tech equipment with the integration of machine, electricity, liquid, gas, computer technology and ceramic technology. It is also the most critical equipment of the ceramic wall and floor tiles production line in the modern world. With the development of ceramic industry, there is an ever-increasing demand for stability, reliability, accuracy and ease of the hydraulic press system. The hydraulic transmission and control system performance and control accuracy are also put forward higher requirements. Based on full-automatic hydraulic press to improve the dynamic characteristics of the hydraulic system, for WL3200T hydraulic system, using AMESim modeling, the process model for WL3200T automatic hydraulic press was set up. Then suppressed part of the piston velocity and dynamic characteristic curve about the Automatic Hydraulic Press were get, and provides the basis parameter and optimization of the system design. This paper studies the following aspects. Ansys the oil-road of the hydraulic system for the WL3200-type,study the working principle for the WL3200-type and motion controling. Based on the performance curve, AMESim was used to create models related the hydraulic system. Through simulation experiments, to verify the accuracy comparing the simulation results with experimental results and repeated amending to the model, until the experimental results is very close to this model, then make the model as a design improvement and similar components . Set up the hydraulic system model for the WL3200-type.Then the simulation was used for the simulation after a similar reference. Determine the parameters of the adjustment range, which reduce the hydraulic system debug time for the purpose of saving time, enhancing the efficiency, and achieving the aim of the simulation. The main parameters about the dynamic characteristics of the hydraulic system were analyzed. It can obtain a number of important performance curve .Th