五层钢筋混凝土框架结构行政实验综合楼毕业设计(可编辑).docVIP

五层钢筋混凝土框架结构行政实验综合楼毕业设计 摘 要 本工程采用钢筋混凝土框架结构，主体结构共5层，底层层高4.85m，其余层层高3.9m。建筑总长86.1m，总宽28.2 m，总建筑高度19.45m，总建筑面积约8000。 首先进行了结构布置方案设计，初步确定了框架梁、柱和楼板等主要结构构件的截面尺寸和基础形式，轴设计竖向荷载（恒载及活荷载）的结构内力Excel软件进行内力组合，找出最不利的一组或几组内力组合。平台板，梯段板，平台梁等构件的内力和配筋计算 关键词： 框架结构 钢筋混凝土 结构设计 Frame Structure Design Of The Office building for JinLing School In YiNing County Student：Wu yifeng NumberSupervision：Cao Shuangyin Yangming Wuting Abstract The project is a reinforced concrete frame structure, which has five stories. The first layer-storey is 4.85 m and the others are all 3.9m. The total length is 86.1m, total width 28.2m, total height 19.45m,and the total construction area is about 8000m2. Since the array of the structure is firstly determined, I calculate the internal force of the frame under the vertical loads dead load and live load and the wind load, also the seismic force. After computing the internal force under all sorts of loads, the combination of internal force can be made by using the Excel software, whose purpose is to find one or several sets of the most adverse internal force of members. Then I make out the cross-section design of beams and columns. Slab stairs is used in this structure. The design of the stairs includes calculating the internal force and reinforcing such components as landing slab, step board and landing girder. In the end, strip concrete footing needs designing。Then, the results is checked by software PKPM, including analyzing the causes of those differences between them. There are 9 construction drawings based on the calculation results in all. Keywords： Frame Construction, Reinforced concrete, Structure Design摘 要 ii 1.工程概况 6 2.荷载计算 7 2.1 竖向荷载计算 7 2.2 活荷载 9 2.3 水平荷载 9 风荷载计算 9 地震荷载计算 10 3.梁柱截面估计 10 3.1 梁柱尺寸 11 3.2 框架柱 11 4.平面布置及楼板配筋 12 4.1 结构选型 12 4.2 结构布置 12 4.3 楼盖板设计（弹性理论） 12 荷载设计值 12 弯矩计算 13 板截面设计 13 5.次梁的设计 15 5.1 A-C区格连续梁计算： 15 5.2 A-C-E区格连续梁： 17 5.3 B-D区格连续梁： 19 5.4 B-D-B区格连续梁： 20 5.5 B-B区格连续梁 21 5.