（毕业设计论文）《一种组合压力传感器的阻尼系数选择研究》.doc

本科毕业论文 题 目：一种组合压力传感器的阻尼系数选择研究 学生姓名： 学 院：理学院 专 业：理论与应用力学 班 级：理力 指导教师： 教授 摘 要 测力传感器是传感器技术中的一个重要分支，它跨计算机、自动控制、机械、电子等多个学科。目前，越来越多的测力传感器已应用到工业、农业、国防、航空航天、医学等众多领域。这些应用对测力传感器的测量范围以及测量精度提出了更高的要求。现有的大量程压力传感器在测量小范围压力时精度不高而小量程的压力传感器精度高却不满足测量范围。压力传感器是测力传感器的一种，在工程中有广泛的应用，传感器也可以认为是由质量，阻尼，弹簧组成的测量系统。上述三个参数的合理选择对其动态力测量的品质有着至关重要的影响。本题目在已有一款组合型压力传感器的基础上，对其中的大量程传感器。仿真研究该传感器阻尼系数对其动态测量性能的定量关系，选出最优的阻尼参数。 关键词：压力传感器，组合结构，动量测量，阻尼参数 Abstract Force sensor is an important branch in the technological field of the sensor. It refers to computer sicence , automation, mechanism, electronic science. At present, more and more various kinds of force sensor are introduced into many application situation , such as industry ,agriculture, national defense, aerospace, medicine, etc. High demands on measurement range and measurement accuracy of force sensor are put forward by these applications. The high precision can’t obtained using the large rang pressure sensors in small measure bound, the small rang pressure sensor is beyond measurement range. Pressure sensor is a kind of sensors, In engineering is widely used, Sensors can also considered by quality, damping, spring composition of measuring system, The above three parameters of the reasonable selection of the quality of its dynamic force measuring have a critical impact, This title of a combination has been the basis of pressure sensor, Process in which a large number of sensors The simulation research of its damping coefficient of the sensor measured dynamic performance quantitative relationship, Select the optimal damping parameters. Key words：Pressure sensor，Composite structures，Momentum measurement，Damping parameters。 目 录 TOC \o 1-3 \h \u HYPERLINK \l _Toc296375909 第一章 绪 论 PAGEREF _Toc296375909 \h 1 HYPERLINK \l _Toc296375910 1.1 传感器介绍 PAGEREF _Toc296375910 \h 1 HYPERLINK \l _Toc296375911 1.2 课题的意义 PAGEREF _Toc296375911 \h 2 HYPERLINK \l _Toc296375912 1.3 本课题的研究背景 PAGEREF _Toc296375912 \h 2 HYPERLINK \l _Toc296375913