全测站光波测距经纬仪GTS-710系列-SKCIC久冠测量仪器.PDF

中文操作手冊 全測站光波測距經緯儀 GTS-710 系列 GTS-710 GTS-711 GTS-712 GTS-713 Foreword Thank you for purchasing the TOPCON Electronic Total Station, GTS-700 series. For the best performance of the instruments, please carefully read these instructions and keep them in a convenient location for future reference. GENERAL HANDLING PRECAUTIONS 1. Do not aim the instrument directly into the sun Aiming the instrument directly into the sun can result in serious damage to the eyes. Damage to the instrument could also result from exposing the instruments objective lens to direct sunlight. The use of a solar filter is suggested to alleviate this problem. 2. Setting the instrument on a tripod When mounting the instrument on a tripod, use a wooden tripod when possible. The vibrations that may occur when using a metallic tripod can effect the measuring precision. 3. Installing the tribrach If the tribrach is installed incorrectly , the measuring precision could be effected. Occasionally check the adjusting screws on the tribrach. Make sure the base fixing lever is locked and the base fixing screws are tightened. 4. Guarding the instrument against shocks When transporting the instrument, provide some protection to minimize risk of shocks. Heavy shocks may cause the measurement to be faulty. 5. Carrying the instrument Always carry the instrument by its handgrip. 6. Ex