板材弹性模量自动检测设备设计及实验研究-机械设计及理论专业论文.docxVIP

东北林业大：孳硕二l：学位论文Abstract 东北林业大：孳硕二l：学位论文 Abstract Lumber elastic modulus has close relations with mechanics performance such as rigidity、 hardness and intensity and SO on．So we classify．,wood depends on elastic modulus to guarantee the product quality after processing．Because the uaditional methods measure lumber elastic modulus with long time and destructive，it can’t satisfy our needs for continuous and nondestructive tests．The 一：classify test device in．aboard has high price，it Can。t be accepted·by Our processing enterprise．Our country measures a large·amount of research on the elastic modulus-—for wood,-一but mostly at the stage of laboratory,failed to apply to production practices．So developing a kind of wood elastic modulus automatic device which can be suitable for producing actually,accords with the national conditions of our country has certain promotion to the wood classify technology,of lumber of our country,it must have good market prospects． This paper introduced lumber elastic modulus is a kind of fast testing device for lumber elastic modulus with FFT、numerical control and computer teclmology．The device acquired lumber elastic modulus by FFT analysis and calculating by computer on knocked sound． By the examination．we know it has close relations between lumber dynamic elastic modulus and static state elastic modulus．Compare on other method．whole detection procedure time consuming and short，automatic intensity high，non—destructive tor lumber and saving cost greatly． This paper has introduced the testing principle、mechanical part designed、automatic control order and software programming for lumber elastic modulus automatic testing device．It mainly introduced data collection and processing and analyzing the testing result of the system．It made out the testing system carl classify lumber and Nondestructixie Testing fast．It is more accurate for measure the result：and cheap，accord with market needs． Keywords automatic testing；elastic modulus；lumber；Fast Fourier