独塔单索面斜拉桥地震反应分析-系统分析与集成专业论文.docxVIP

Abstract With the scale of cable-stayed bridge enlarging, more and more attention is paid for the aseismatic capability of cable-stayed bridge. Shizhou Bridge is a single tower partial one-side cable-stayed bridge, which is a very important part of the urban traffic system, and the earthquake intensity of the situation of this bridge is Ⅵ, so analyzing the earthquake response of this bridge is significant. The dynamic behavior and seismic response of Shizhou Bridge are investigated in this paper. After investigating the properties of cable-stayed bridge component in detail, the FEA model of Shizhou Bridge is established. The advanced analysis program ANSYS is used to get the 10 frequencies and corresponding vibration modes. The standard seismic response spectrum is inputted from longitudinal, transverse and vertical direction respectively. Two kinds of seismic combinational modes, which are longitudinal vibration plus vertical vibration and transverse plus vertical vibration are considered. In order to ensure the precision, the CQC (Complete Quadratic Combination) approach is applied. The spectral analysis is linear so the nonlinear factors cannot be taken into account. The dynamic properties of Shizhou Bridge are calculated also with dynamic time-history analysis considering the nonlinear factors. The earthquake response is gained according to the calculation results of the two methods. These laws can be used as the basis of seismic design of the Shizhou Bridge and is useful for directing seismic response analysis of such kind bridge. Keywords: cable-stayed bridge; ANSYS; dynamics characteristic; earthquake response; response spectrum method; time history analytical method. 目 录 摘 要................................................................................................................. I HYPERLINK \l _bookmark0 Abstract ............................................................................................................ II 1