独塔斜拉桥动力特性及地震响应研究-公路桥梁与渡河工程专业论文.docxVIP

Abstract Huang Pi Houhu bridge of Wuhan is a single pylon and single cable plane cable-stayed bridge, which is constructed with pre-stressed concrete box girder. Its spans are 90 + 128 m . The connection mode of the main girder, bridge pylon and the piers of the single pylon cable-stayed bridge, determines the effectiveness of the mindshare among the internal system components. For single pylon cable-stayed bridge of different connection form among pylon, girder and piers, studying the dynamic behavior and seismic performance is of practically significant. In this paper, the author has mainly done the following research work. The overall arrangement of single pylon cable-stayed bridge and the behaviors of the different structure system have been discussed. For single pylon cable-stayed bridge of different structure system, the author has studied the modeling method in analyzing dynamic behavior s. Take Huang Pi HouHu bridge of Wuhan (rigid-frame structure system, auxiliary pier is set at the side span) as the background, the boundary conditions of the pylon, beam and pier have been changed, finite element analysis software--Midas Civil has been used to establish a rigid frame model--half floating beam model, floating model, pylon consolidation model and a side span rigid frame model 2 with no auxiliary pier has been established at the same time, as to find the differences of the two patterns. Multiple Ritz vector method has been used to analyzes the dynamic behavior s of the five different model, and compare the differences of the behavior value. Standard acceleration response spectrum has been used as the input spectrum curve, to analyze the response spectrum of the five different models. Take the rigid frame model 1 as an example to calculate the eight (one dimensional- three, two dimensional-two and three dimensional-three) seismic response of the single pylon cable-stayed bridge in different combination, and have obtained the general rule of seismic response. T