中文版机械行业安全.pptxVIP

工作场所机械防护;教学内容 ;;矽比科防护要求;我们为什么要进行防护并检查？ 下面是我们的工厂;我们为什么要进行防护并检查？;我们为什么要进行防护并检查;事后总结..............;危害防护;危害防护;危害防护;危害防护;危害防护;危害防护;危害防护;防护类型;防护类型;防护类型;防护类型;防护类型;小组练习; ;防护罩设计: 危险源的数量和位置;护罩设置:危险源的数量和位置;Guard Placement: Number location of hazards;Guard Placement: Number location of hazards;If the length of the slot is less than or equal to 65mm, the thumb will act as a stop and the safety distance can be reduced to 200mm. For openings 120mm, safety distances should adhere to the requirements outlined in Reaching Over Protective Structures.;3. Reaching Over Protective Structures: Distance Guards do not completely enclose a danger zone, instead preventing access by virtue of its dimensions and the distance between the protective structure and the hazard zone.;设计依据;防护的固定;材料 需要被考虑的因素;防护设施选择;防护措施的移除;监察与维护;危险评价 – 我们为什么要做?;风险矩阵 THE RISK MATRIX;执行监察;缺失提报;报告你的发现;其他危害:;审查;总结;