（毕业学术论文设计）-汽车差速器结构有限元分析.docVIP

汽车差速器结构有限元分析 摘要 随着社会发展，铝合金压铸件的应用越来越广泛。但是由于各种因素，铝合金压铸件存在着诸多缺陷，如缩孔、缩松、气孔、裂纹、氧化夹杂等。这些缺陷制约了压铸件工业的发展，影响压铸件的力学性能，安全性能。 压铸过程数值模拟是现代铸造工业的重要手段，通过对工艺参数的分析研究，可以优化方案，从而确保铸件质量，提高生产效率。这也为铸造工程师提供新的途径来研究压铸过程。 本文主要是运用 ANSYS 分析软件，对汽车铝合金差速器支架和发动机悬置隔垫进行分析，观察其缺陷，然后针对这些缺陷进行工艺优化、改进。优化后再模拟。 本文进行的受力分析，为优化压铸工艺提供了理论依据和指导，实现了数值模拟的意义。 关键词　：压铸 ADC12铝合金 支架隔垫 有限元分析 The automobile differential structure finite element analysis Abstract With the development of the society, there is an increasingly wide use of aluminum die casting. However, due to various factors, many defects exist in the aluminum die casting, such as shrinkage cavity, shrinkage porosity, pores, cracks and oxide inclusion, etc. These defects restrict the development of casting industry and influence the mechanical properties and safety performance of die casting. Numerical simulation of die casting process in an important way in modern casting industry. Forecasting the quality of aluminum gear housing by simulating can reduse the blindness of the development of die casting process; through the analysis of process paraments, the program can be optimized so as to ensure the quality of casting and improve production efficiency . This also provides a new way for foundry engineers to study die-casting process. This paper mainly uses ANSYS to stress analysis on differential stents and the engine mount the pad,then to optimize and improve these defects. And simulation again. In this paper , the simulation analysis provides theoretical basis and guidance for optimizing the die casting process to realize the significance of the numerical simulation. Key words: die casting adc12aluminum alloy stents septa finite element analysis  目录 TOC \o 1-3 \h \u HYPERLINK \l _Toc327001697 目录 PAGEREF _Toc327001697 \h III HYPERLINK \l _Toc327001698 第1章 绪论 PAGEREF _Toc327001698 \h 1 HYPERLINK \l _Toc327001699 1.1 课题背景 PAGEREF _Toc327001699 \h 1 HYPERLINK \l _Toc327001700 1.2 铝合金及adc12型铝合金的性能特点 PAGEREF _Toc327001700 \h 1 HYPERLINK \l _Toc3270