基于dsp的 fir低通滤波器设计.docVIP

基于dsp的 f.i.r低通滤波器设计 Title: the use of DSP FIR filter design Digital processor (DSP) has a strong data processing ability. It has a wide range of applications in high-speed digital signal processing, such as digital filtering, audio processing, image processing and so on. Compared with analog filters, digital filters do not drift, and can handle low-frequency signals, the frequency response characteristics can be made very close to the ideal characteristics, and the accuracy can be very high, easy integration. The characteristics of the use of DSP chip programmable digital filter can be realized by modifying the parameter of the filter is very easy to change, the following is designed using TMS320VC54x DSP chip FIR digital filter. Design purpose In a practical application system, there are always a variety of interference, so in the system design, the quality of the filter will directly affect the performance of the system. Digital processing using DSP can be used to sample a mixed signal source with noise and signal, and then extract the noise by digital filtering to extract useful signals. Therefore, digital filter is the most basic application field of DSP, and familiar with DSP based digital filter can provide a good foundation for the development of DSP application system. Technical index 1, the digital filter frequency parameters are as follows: the passband cutoff frequency for bandpass boundary points and transition zone, down to the prescribed minimum at the point of signal gain. The stopband cutoff frequency with boundary points and transition zone for resistance, down to the prescribed minimum at the point of signal attenuation. The turning frequency: attenuation to 1/2 signal power (about 3dB) when the frequency, in many cases, often with FC as the band or the stopband cutoff frequency. When the circuit is not lossy, the natural frequency is its resonant frequency, and complex circuits often have multiple natural frequencies. 2, gain and loss The gain of