（毕业学术论文设计）-圆盖注塑模具结构设计与制造.doc

PAGE 6 无锡科技职业学院毕业设计（论文） 圆盖注塑模具结构设计与制造 PAGE 6 圆盖注塑模具结构设计与制造 摘 要 本课题主要是针对圆盖的注塑模具设计,该圆盖材料为改性PS，是工业生产中常见的一种保护盖产品。通过对塑件进行工艺的分析和比较,最终设计出一副注塑模。该课题从产品结构工艺性，具体模具结构出发，对模具的浇注系统、模具成型部分的结构、侧抽机构、顶出系统、冷却系统、注塑机的选择及有关参数的校核都有详细的设计，同时编制了模具的加工工艺并用UG进行加工。通过整个设计过程表明该模具能够达到此塑件所要求的加工工艺。根据题目设计的主要任务是圆盖注塑模具的设计，也就是设计一副注塑模具来生产塑件产品，以实现自动化提高产量。针对塑件的具体结构，该模具是潜伏式浇口的单分型面注射模具。 关键词:注塑模；圆盖；UG。 Rounded lid injection mold designAbstract ：This subject mainly is aims at the dome of injection mold design, this dome material for modification PS, is common in the industrial production of a protective cover products.Through the process of plastic parts for analysis and comparison, the final design of an injection mold. The product mix from technology issues, and specific mold structure of the casting mold system, mold forming part of the structure, side pumped body, top of the system, cooling system, the choice of injection molding machine and related calibration parameters are detailed design, at the same time and developed a simple process dies. Through the entire design process that the mold can be achieved by the plastic parts processing requirements. Designed in accordance with the subjects main task is to build a round plastic injection mold design, that is, the design of an injection mold to produce plastic products in order to achieve automation to increase production. According to the plastic parts structure, mould latent type door a single injection mold parting surface. Key words： Injection mold; round cap ; UG. 目录 前言····························································· (1) 第一章 方案论证·················································· (2) 1.1 结构分析················································ (2) 1.2 成型工艺分析············································ (3) 1.3 生产规模················································ (3)第二章 圆盖注塑模结构设计········································ (4) 2.1成型零件设计············································