高压开关柜无线测温系统的分析-电气信息检测技术专业论文.docxVIP

华中科技大学硕士学位论文 华 中 科 技 大 学 硕 士 学 位 论 文 II II Abstract The high-voltage switchgear, as an important equipment of the safety operation for the electric power system, its internal conductive joint overheating could cause the damage of the electrical equipment, and even fire or more serious power supply accident. Therefore, the implementation of the high-voltage switchgear on-line monitoring has been an important research subject for the power system electrical equipments safety operation. Because of the different features between the high-voltage switchgear temperature measurement system and ordinary temperature measurement system, it compares the advantages and disadvantages of all kinds of temperature sensor, and chooses the semiconductor digital temperature sensor. On this basis, I designed a high-voltage switchgear wireless temperature measurement system, which can achieve the realtime on-line monitoring of the high-voltage switchgears temperature. The temperature measurement system is composed of transmitting terminal, receiving terminal and PC monitoring system. The transmitting terminal majors in temperature measurement of the joint and the wireless transmission of the temperature data; the receiving terminal majors in receiving the data from the transmitting terminal, and transmitting the data to PC monitoring system under MODBUS protocal through the RS-232 bus; the PC monitoring system achieves the purpose of on-line monitoring by communicating with the receiving terminal under the MODBUS communication protocal and processing and displaying the temperature data. The paper does some research on electromagnetic compatibility for this system considering the bad electromagnetic environment of the high-voltage switchgear. In hardware, it mainly adopts copper shell for EMSE, and makes the reference earth of this system and primary voltage equipotential. In software, it adds the WATCHDOG in the single chip program and smoothing filter function in PC program so as to e