以数位影像系统建立抬举作业之动作分析.PDFVIP

行政院國家科學委員會專題研究計畫 成果報告 以數位影像系統建立抬舉作業之動作分析 計畫類別：個別型計畫 計畫編號：NSC91-2312-B-324-001- 執行期間：91年12月01日至92年07月31日 執行單位：朝陽科技大學工業工程與管理系(所) 計畫主持人：羅世忠 計畫參與人員：卓旻賢 吳峻榮 黃啟綸 報告類型：精簡報告 處理方式：本計畫可公開查詢 中 華 民 92年10月31日 國 行 數 立 NSC 91 2312 B 324 001 行 91 年 12 01 92 年 07 31 羅 理 參 理 料 量 立 2數 年 數 (DLT, direct linear transformation) 2 3 立數 度 立數 度 (Vicon motion system) 料 15mm 度 10 度 便 數 略 勞錄 : 數 The injury hazard of manual lifting task was regarded as physically the most stressful material handling activity as well as a significant factor that is associated with the occurrence of low back pain. It’s a challenge for ergonomics and biomedical engineering because of the difficulty in evaluation and prediction. The biomechanical approach in Manual lifting task has been contributed a lot, however the complete data were obtained only in the laboratory owe to the capture system. Nevertheless, the digital video and personal computer, recently developed quickly, make it possible for study lifting task in the workplace. The purpose of this study is to develop a portable motion analysis system based on digital video system for lifting task. In the methodology, the motion pictures were captured using two video cameras for a young man with none of musculoskeletal disease in lifting task. Direction Linear Transformation (DLT) method was used for converting the trajectory of markers from 2 dimensional position to 3 dimensional position. The error of the position of markers was compared with two motion system, including a self-designed