天桥高支撑施工技术的探讨.docVIP

  • 3
  • 0
  • 约5.78千字
  • 约 14页
  • 2018-10-15 发布于福建
  • 举报
天桥高支撑施工技术的探讨

天桥高支撑施工技术的探讨   摘要:模板工程是继洞口和临边、脚手架、塔吊、井字架与龙门架和基坑外,成为建筑工地的第六大杀手,尤其是高支撑模板体系更是事故不断。因此必须提高高支撑施工技术,加强高支撑施工技术质量控制。重庆市第二人民医院医技楼工程中,有较大规格的梁、柱,为此施工中采用了高大模板支撑体系施工工艺,本文对其工艺与安全技术进行分析探讨,望对同类工程起到借鉴作用。   关键词:高支撑;碗扣;架体构造   Abstract: the template project is the mouth of the cave and limb, scaffolding, with gantry cranes, tic-tac-toe frame and foundation pit, as the sixth largest killer of construction site, particularly high support formwork system accidents. Therefore must raise high support construction technology, strengthen the support construction technology of high quality control. The second peoples

文档评论(0)

1亿VIP精品文档

相关文档