内高压成形制备6063铝合金异形管件的壁厚分布-中国有色金属学报.PDF

25 9 2015 9 Volume 25 Number 9 The Chinese Journal of Nonferrous Metals Sep. 2015 1004-0609(2015)-09-2372-09 6063 1 2 1 1 (1. 150001 2. 130001) 2.63%A−A 15.6%3.31% B−B 15.8%A−A 0.19 mmB−B 0.28 mm 6063 TG394 A Thickness distribution and size deviation of 6063 alloy irregular tubular parts prepared by hydroforming 1 2 1 1 CAI Yang , LIU Qiang , WANG Xiao-song , YUAN Shi-jian (1. School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China; 2. China FAW Group Corporation, Changchun 130001, China) Abstract: In order to realize the application of aluminum sub-frame in domestic car, experimental researches were conducted to investigate the hydroforming process of the sub-frame. The thickness distribution on typical section of tubular parts along the circle direction during the press bending, preforming, and hydroforming processes was separately measured, and the thickness distribution rule was mainly discussed. Then, the normal distribution function based on statistical analysis for the geometry size of various sections was carried out, and the maximum dimensional deviation compared with the designed requirement was obtain