多端电压源型直流输电系统的控制研究-电力电子与电力传动专业论文.docxVIP

三峡大学硕士学位论文 三 峡 大 学 硕 士 学 位 论 文 PAGE IV万方数据 PAGE IV 万方数据 Abstract With the increasingly requirement of electric power , the scale of new energy power generation expands increasingly ,which result in the power network expansion, the traditional active current transmission and two terminals high voltage direct current transmission appeared insurmountable technical obstacles, and at the same time, the energy shortage, environmental pollution problems are becoming more and more serious. The development and utilization of clean and renewable energy, such as solar energy, wind energy, alleviate the energy crisis and environmental pollution problems, but need a higher request of controlling the transmission system. Considering the wind energy, solar energy is dispersed, small, intermittent, far away from the load centers and other characteristics, and the Flexible direct current transmission technology based on Voltage Sourced Converter and Pulse Wide Modulation is flexible, reliable, economic the advantage, so this paper focuses on the flexible direct current transmission technology based on VSC research. Firstly, this paper discussed the circuit topology of Voltage Source Converter Multi-Terminal HVDC system, under the abc coordinate system, the static mathematical model of one converter of the multi terminal system is established, and on this basis derived in the dq0 coordinate system the mathematical model, combined with the model of voltage source DC transmission system (VSCHVDC) the basic control principle is briefly analyzed. Secondly, the double closed loop direct current control of VSC converter was studied , the inner loop current based on voltage feed forward compensation decoupling control strategy was designed. the voltage outer loop control strategy of active power, reactive power, direct current voltage, active current voltage was discussed , realizes the decoupling control of active and reactive power, focus on the upper coordinated control strategy of VSC