钻井泵基础知识PPT课件教学材料.pptVIP

检查活塞锁紧螺母，若遇腐蚀或损坏应换掉（因为一般上紧过三次以后的螺母，镶在其内的密封圈已失去锁紧能力）。 Check the piston lock nut. When it is cankered or worn, change it, because generally, if a nut is screwed down three times, the sealing ring inlayed in it shall lose the seal function. ? 从排泄孔盖的丝堵处放一次水，直至见油为止。 Drain water from the screw plug on the drain hole cover until oil out. ? 检查并清洗润滑油泵管线中的滤网一次。 Check and clean the filter strainer of lubrication pump pipeline once. 每月的维护保养 monthly maintenance ? 检查液力端的所有双头螺栓和螺母。例如缸盖法兰螺母，液缸与机架联接的螺母，以及吸入管路、排出管路的联接螺栓、螺母等。如果出现松动，须按规定扭矩重新上紧。 Check all the studs and nuts of power end. Such as the flange n