基于DS和C地位共阳数码管可调历时钟闹钟秒表器(有整点报时).docVIP

HC #includereg51.h//头文件 #includeintrins.h #define uchar unsigned char #define uint unsigned int sbit DATA=P1^1; //位定义1302芯片的接口，数据输出端定义在P1.1引脚 sbit RST=P1^2; //位定义1302芯片的接口，复位端口定义在P1.1引脚 sbit SCLK=P1^0; //位定义1302芯片的接口，时钟输出端口定义在P1.1引脚 sbit K1=P3^0; sbit K2=P3^1; sbit K6=P3^2; sbit K4=P3^5; sbit K5=P3^6; sbit K7=P3^3; sbit K3=P3^4; sbit K8=P3^7; sbit ALARM_BEEP = P1^3; uchar kedaoru=0,qw1=0; uchar second2,minute2,hour2,second3,minute3,hour3,second4,minute4,hour4,second5,minute5,hour5,second6,minute6,hour6, second7,minute7,hour7; u