《光纤耦合半导体激光器输出光场分布研究》-毕业学术论文设计.docVIP

摘 要 当今社会是信息社会，而信息时代的一个主要特征是信息，信息源及信息的获取、传递、处理等能力在信息技术支持下高速发展。其中信息传递技术即通信技术的飞速发展，不仅改变了人类的生产和生活方式，还对全球的政治、经济、军事领域产生强烈的冲击。 本文以数字通信技术为基础，完成了一路经过DPL编码的语音信号和两路8位数字信号的传输。在设计中，以巴克码为传输信号的帧头，将三路含有信息的信号同巴克码组成四路信号，同步时分复用后，成为一路32位的串行码，经过CMI码编码，再通过光纤通道来进行有效的传输，以实现最好的传输效果。系统采用专用编码芯片对信号进行编码； 通过同步时分复用的方式实现信号的复用传输，设计并调试了具体的电路，最后对语音信号和数字信号传输中的各项指标进行了测试，通过实验，证明了方案的正确性和可行性。 在简介语言和技术等相关知识的基础之上，本文还重点研究了基于的数字复用系统的设计思想及其模型的建立，并通过软件MaxplusⅡ编程、调试和波形仿真，最后下载到目标芯片中实现。另外还介绍了相关的硬件电路的设计与调试。 关键词：；时分复用；光纤； ；同步设计 Abstract Today’s society is the information society, but the main characteristic of the information times is information, information source and the ability of getting the information, transmission or processing the information. So that the information supports the high speed development. The technology of the information transmission is developed rapidly, not only changed humanitys production and the life style, but also impacted the global politics, the economy and the military domain. This article based on the digital communication technology as a foundation, and the transmission which have one group of the DPL code signal and two groups of 8 digital signals. In this design, it takes the Barke code as the transmission signal frame head, with three groups signal of the information ,by the synchronized time-sharing turns round, it becomes a group of 32 serial codes, and then encoded to become the CMI code encode. In the end, It transmitted effectively by the optical fiber channel ,to get the best transmission effect. The system uses the special-purpose code chip to encode the signal; and is realized by the way of the signal which the duplicate uses through the synchronized time-sharing duplicate, uses the transmission, designed and debugged the concrete electric circuit. Finally, it has carried on the test of the voice signal and every target of the digital signal transmission. After the experiment, we can prove that the plan is correct and feasible. This paper made a study of the des