鹊山水库出库泵站主机房的设计重点及难点浅析.docVIP

鹊山水库出库泵站主机房的设计重点及难点浅析 　　【摘 要】济南市引黄供水鹊山调蓄水库出库泵站主机房为岸边式泵房，位于库区内，由前池和机房二大部分组成，二部分整体浇筑，底板联为一体。主机房前池采用砼整体现浇，池壁为钢筋砼池壁，高度皆为11.24m，前池的上部盖板以现浇为主，中部旋转格网室盖板为预制钢筋砼板。泵站主体lOm以下皆淹没于水中，因此地下防水砼工程设计成为该泵站主机房设计的重点和难点，也是该工程需重点解决的技术问题之一。我们确定了从结构和材料两方面采取综合措施的方案，来处理这个问题。通过采取的综合措施，该出库泵站从1999年底开始投入试运行，到2000年5月正式满负荷向黄河水厂供水，在水库最高蓄水位下运行至今，砼结构未发现任何温度裂缝，机房无任何渗漏水现象发生，机房内一直保持清洁干燥，保证了泵站安全正常的运转，取得了良好的经济效益和社会效益。?? 　　【关键词】岸边式泵房；地下防水工程 　　 　　Queshan Reservoir pumping out of the library and computer room design focus difficulty Analysis?? 　　He Zhong-jian,Li Zhen 　　(Investigation and Design Institute of Shandong Yellow River Jinan Shandong 250013)?? 　　【Abstract】Jinan Yellow River water pumping station Queshan flood storage reservoir host a library-style room to shore pumping station, in the library area, pool and rooms from the previous two major components, the second part of the overall casting, floor together as one. Host the whole house before the pool using in-situ concrete, reinforced concrete wall for the wall, are all height 11.24m, the top cover to the pool before the main cast, the central chamber cover for the rotating grid of precast reinforced concrete panels. The following are the main lOm pump submerged in the water, the underground water pumping concrete project design to become the host of the room design is important and difficult, but also the need to focus on the project to solve technical problems. We identified the structure and materials from both programs to take comprehensive measures to deal with this problem. By taking comprehensive measures, the pumping station from the end of 1999 the library began to put into trial operation in May 2000 formally to the full capacity to the Yellow River water supply, the highest water level in the reservoir has run, the temperature did not find any concrete structure cracks, room without any leakage of water occurred, the engine room has been kept clean and dry, ensure the safety of the normal operation of pumping stations, and achieved