《基于CAD技术的蜗杆减速器的三维造型》-毕业论文.docVIP

毕业设计 题目: 蜗杆减速器的三维造型 系 部 自动控制工程系 专 业 名 称 机电一体化 班 级 机电 班 姓 名 学 号 指 导 教 师 （讲师） 2011年11月15日 基于CAD技术的蜗杆减速器的三维造型 摘　要 随着CAD技术的不断发展，应用CAD技术来进行三维造型设计已经被广泛的使用，减速器是最常见的机械产品，减速器的设计历来是机械设计中经典的项目之一。 下置式蜗轮蜗杆是减速器的一种形式，它与蜗杆上置式减速器相比具有搅油损失小，润滑条件好等优点，适用于传动V≤4-5 m/s。 在论文中，首先，对此次课程设计要求作了简单的介绍，接着阐述了蜗轮蜗杆的结构和条件。然后对其结构粗设计，接着就按课程设计准则和设计理论进行尺寸的计算和校核。代表着减速器的一般过程。对其他的蜗轮蜗杆的设计工作也有一定的价值。 目前，在蜗轮蜗杆减速器的设计、制造以及应用上，国内与国外先进水平相比仍有较大的差距。国内在设计制造蜗轮蜗杆减速器的过程中存在着很大程度的缺点，问题如：轮齿根切；蜗杆毛坯的正确设计；刚度的条件；蜗轮蜗杆的校核。 因此，通过蜗杆减速器的三维造型设计来研究三维造型设计具有代表性。 关键词：CAD技术；蜗杆减速器；三维造型 The worm reducer based on CAD technology of 3 d model Pick to With the continuous development of CAD technology, the application of CAD technology to carry out three dimensional modelling design has been extensive use, the speed reducer is the most common mechanical products, the design of the speed reducer is always the mechanical design of the classic one of projects. Underneath type worm gear reducer is a kind of form, it and worm placed on style reducer of stirring oil loss than small, lubricating the advantages, suitable for transmission V than 4-5 m/s. In the paper, first of all, for the course design requirements were simply introduced, and then expounds the structure of the worm and conditions. Then the structure design of thick, then press the course design code and the design theory of the calculation of the size and check. Represents the general process of gear reducer. To the rest of the worm gear and worm design work also has a certain value. At present, in the worm gear and worm reducer design, manufacturing and application, the domestic and foreign advanced level is still a big gap compared. Domestic in the manufacture of worm gear and worm reducer process there are a large degree of shortcomings, such as: the root round cut; Worm of blank correct design; The conditions of the stiffness; Worm gear a