船体建造精度正(英).docVIP

PAGE PAGE 14 THE STANDARDS OF SHIPBUILDING QUALITY CONSTRUCTION ACCURACY Q/SWS60-001.2-2001 Notes: This standard includes the items of inspections/tests for hull construction, outfitting, machinery and electrical installation and painting. The standard applies mainly to the conventional sea-going steel ships of 3000 tone deadweight and above drive by diesel engine. This standard also be used as a reference for ships under 3000 tone deadweight. 1 HULL CONSTRUCTON 1.1 Steel Materials Surface defects of steel plates shall be kept within the limits as defined in table1-1 Table 1-1