超长桩低应变应力波传导检测技术研究-建筑与土木工程专业论文.docxVIP

万方数据 万方数据 Abstract The pile quality detection of common pile, commonly used at home and abroad of the low strain reflected wave method, through the measurement of pile response curve of acceleration or velocity, to determine the integrity of pile foundation. The integrity of this method can be used in the detection of pile body, the presumption of the defect type and the pile body about location, but also on the pile length check, the strength grade of concrete pile to make a preliminary estimation. The method is simple, quick, low cost and the survey of engineering, theory with the relatively perfect and advanced diagnostic technology. However, for the super long pile, the method is difficult to obtain the pile bottom reflection or defect reflections from the depth is larger, even with a strong stick percussion wide pulse signal, also not necessarily can measure reflected signal clear, resulting in poor accuracy, so that the test results can not be fully complete and accurate. So, it is necessary to study the method is rapid, efficient, saving, high precision, applicable to a wide range of a, my paper is used as the starting point of the study. First of all, for testing the quality of pile body comparison, analysis of low strain reflected wave method and traditional method in engineering application superiority compared. Secondly, the low strain reflection wave method to pile soil pile interaction model, analysis of the key factors of the stress wave energy attenuation, the stress wave relay transmission detection technology based on low strain method. Thirdly, through the model pile by low strain finite element simulation analysis, verify the feasibility and superiority of this technique in super long pile detection applications. Finally, this chapter through the pouring pile model, the relay transmission method test, summarizes the detection before, and on-site installation, the late signal acquisition and some practical experience, to lay the foundation for the