纺丝机专用空气幕隔断效应的数值模拟研究-供热供燃气通风及空调工程专业论文.docx

万方数据 万方数据 纺丝机专用 纺丝机专用空气幕隔断效应的数值模拟研究 ABSTRACT The problem of high energy consumption had become the focus of spinning industry in the context of practicing the national policy of Energy Conservation and Emission Reduction. The CFD technology and experiment was adopted as research methods to solve the problem of high energy consumption and pollutants distribution under current air-conditioning mode—direct air conditioning system in the production process. The CFD steady-state models of workshop、air curtain and spinning machine were established to analyze the force and the air distribution in front of the pull window of spinning machines. Also the partition effect of the air curtain was studied in detail. Finally, the best air supply velocity、slits width、the angle of air supply were obtained by comparing measured air temperature in spinning machines and contaminant concentration outside machines with simulated one. From the study, we provided the foundation for improving the ventilation and air-conditioning modes of spinning machine shops and made the adoption of craft air conditioning for spinning machines and comfort air conditioning for workshops possible, leading to significant energy saving. The research briefs were: By analyzing the air distribution of the specific air curtain of spinning machines under different air supply velocity, we obtained that the air supply velocity at 4m/s and 4.5m/s can guarantee the temperature inside spinning machines within the range of required temperature and ensure external air will not flow into machines under the condition of 100mm for the slid width and 0°for the air supply angle. Provided that the temperature in the machine met the requirement, we changed the slid width to 150mm and kept the air supply angle as 0°. We found that 3m/s for air the supply velocity was better than 2.67m/s. Kept the slid width as 150mm , the air supply velocity as 3m/s. We concluded from the simulation that 5°for the air supply angle can