信息物理系统在变压器稳压调节控制中的应用研究-ChinaXiv.PDFVIP

/article/02-2019-02-057.html 计算机应用研究 信息物理系统在变压器稳压调节控制中的应用研究 * 许 刚，赵妙颖 (华北电力大学 电气与电子工程学院, 北京 102206) 摘 要：考虑到现有变压器电压调节方法受调压档位限制，且电压调整判断依据为调度部门确定的电压曲线，难以实 现灵活、高效、高精度的变压器输出电压稳定调节，提出一种基于信息物理融合系统的稳压动态调节方法以更好地解 决变压器运行过程中出现的电压偏移问题。建立变压器的物理模型与信息模型，通过物理参数与信息属性的相互映射， 利用动态链接对物理模型与信息模型在统一仿真平台上进行整合，建立变压器的信息物理融合系统模型，通过信息量 对物理量的实时反馈作用机制，控制变压器原副线圈匝数比的自动调节，实现变压器输出稳压。仿真实验结果表明信 息物理融合方法在变压器输出电压稳定调节应用中具有一定的有效性。 关键词：信息物理系统；电力变压器；物理模型；信息模型；稳压调节；优化控制 中图分类号：TP14 doi: 10.3969/j.issn.1001-3695.2017.08.0719 1 v Application of cyber physical system on transformer constant voltage modulation control 6 4 2 Xu Gang, Zhao Miaoying 0 (School of Electrical Electronic Engineering, North China Electric Power University, Beijing 102206, China) 0 . 5 Abstract: Generally, for the limited regulating gear restricts the existing transformer voltage regulation method, and the criterion 0 of voltage regulation is the voltage curve determined by dispatching department, it is difficult to achieve a flexible, efficient, 8 1 and high precision constant voltage modulation. To better solve the problem of transformer output voltage deviation, this paper 0 proposed a method to dynamically adjust the voltage quality based on cyber physical system. Firstly, transformer physical model 2 : and information model are respectively established with MATLAB Simulink and Enterprise Architect (EA) . Then according to v the mutual mapping between physical parameters and information attributes, with the help of an intermediary platform—Visual i X Studio, the dynamic link library is used to integrate the physical model and infor