CAD2fCAM技术制作Ti2448烤瓷修复体的可行性分析.doc

- -- 第四军医大学硕士学位论文 coping is fabricated by the CAD/CAM technology. This study was designed to measure the fit of Ti2448 copings machine-milled by Wieland CAD/CAM system, and evaluate the bond strength between milled Ti2448 alloys and low-fusing porcelain. The effect of thermal and mechanical cycling on the bond strength was evaluated. Method: Ti2448 and cp Ti copings were fabricated by Wieland CAD/CAM system. The margin and internal fit of the copings were measured under Stereoscopic Microscope. Ti2448 and cp Ti specimens were milled. The thermal expansion coefficient (CTE) of Ti2448 was eva