风机塔架静动力特性及疲劳分析-建筑与土木工程专业论文.docxVIP

三 三 峡 大 学 全 日 制 专 业 学 位 硕 士 学 位 论 文 PAGE IV万方数据 PAGE IV 万方数据 Abstract The main role of wind turbine tower is to support the wind turbine and impeller, and give them enough height to run and expand the operating efficiency of the fan, so it’s essential to the tower’s security, and it’s necessary to perform stress analysis for the tower, and to ensure the safety of the tower. Meanwhile, the service lives of the continuous steel tower loads are analyzed to ensure the normal life of the tower. In this paper, based on the discussion of the status of research on the tower, it is divided into three conditions, firstly, tower in the static analysis of the role of the force, we got the three conditions of displacement and stress; Secondly, modal tower analysis were discussed and there is no mass modal mass results; Thirdly, according to the linear filtering theory and numerical analysis software Matlab, artificial production of fluctuating wind and Choose Kaimal spectrum as the target for fitting. The generation of fluctuating wind is converted into load applied to the tower, to get the maximum displacement and the maximum stress time history. Finally, Using time history analysis results and other parameters of fatigue load spectrum, fatigue analysis and life evaluation was carried out on the tower. From the results, were the three conditions, the tower displacement under static force 0.212m, 0.527m, 0.48037m, and the stress were 55.03Mpa,187.26Mpa,159.16Mpa.Come to affect the safety of the tower is cut-out wind speed. In the modal analysis, top quality piece had a great impact on natural frequency of vibration and cannot be ignored, but also draw fan operating frequency to avoid the risk of the frequency range, resonance effects do not occur. Through simulation and related fluctuating wind velocity data comparison and found that the resulting velocity spectrum to meet the test requirements, indicating fluctuating wind simulation method used in this paper is