风机水泵专用变频器的设计研究-电气工程专业论文.docxVIP

q 、 、 、 「丁凡 w ABSTRACT Nowadays in Chínese industrial fields，there are a lot fans and pumps which can be re衍Ofitted with frequency variable ∞nverter soωto save energy. But lack of 就andardωnverters especially for these application ，which need converters directly used by end user in China mainly. In this paper，combiníng the frequency converter development project involved，the author deeply analyze and study on the frequency converter hardware design，so班ware design and tests，，including their driver circuits， protection circuits and comprehensive design. In hardware design author detailed describe the power module selction in main circuit and its impact to the converer. The low inductance design，design for 480V/60Hz power suppl弘 common AC bus bar scheme are discussed. Also 批 is described how low voltage frequency converter meets category 3 Emission limits. And then the selction principle of input and out reactor for converter is mentioned. In so由ware design several functions developed especially for 也n and pump application are explained. Based on these features the optimized design scheme and comp创itive product can be providedωcustomer to realize energy saving and less emission finally. The main study method and creativity of 仕equency converter development project which author involved recently 盯eωprovide key-tumover standard converter after widely summarizing 伽 requireme础 of fan and pump application in China， taking into consideration of the square torque，linear torque and other variable torque load characteristics. As well to define eve叩 feature and structure of converter based on由esituationofenergy-savingretrofitsite. Improvement and optimization many times according to the results of comprehensive and strict tests，at last the converter series were developed which can meet related intemational and domestic standards. Following two tough tests will be detailed introduced in this paper: EMC test compliance with C3 category and type tes