刚构 连续组合梁桥地震响应分析-桥梁与隧道工程专业论文.docx

华 华 中 科 技 大 学 硕 士 学 位 论 文 II II Abstract Continuous bridges are advanced in better mechanical performance and perfect technique, but need rubber bearings with large tonnage, and large amount of maintenance work. The fixed pier of continuous rigid-frame bridges improves the mechanical performance of structure under horizontal load( such as the action of earthquake). This structure has better crossover capability, but its serviceable range is limited because of the complex stress of fixed pier. Rigid frame-continuous composite girder bridges have the advantage of both styles and overcome their disadvantage. They are particularly good in mechanical characteristics, using functions and environment adaptability, because the demand of the height of fixed pier is reduced compared to that of long unit and long span continuous rigid-frame bridges. Modern economy depends on the traffic line more and more. Once bridges - the key projects of traffic line- were ruined in earthquake, it would lead to great losses of life and property. Therefore, Seismic Response Analysis and necessary preventive measure must be taken to protecting the bridges of great importance. The calculations of rigid frame - continuous composite system girder brid ges are not defined clearly in existing seismic code. Based on relevant guidelines about seismic design in the new guidelines for seismic design, an analysis of seismic elasticity and ductility response about the Beiyilu Bridge was taken in this paper to provide basis and reference to this project, and improve theoretical and practical experience for the seismic design of later projects. Several main parts are included in this paper: With the study of Beiyilu Bridge in Urumchi, N-M-f relationship about the plastic hinge section of this bridge was programmed, Moment- curvature curve was calculated and drawn, and then transformed into equivalent Double Broken Line Model according to the guidelines. III III According to the structure characteristics