压缩空气罐计算书新.docVIP

PAGE 27/ NUMPAGES 49 DESIGN DATA: 设计参数 (1) APPLICABLE CODE 相关规程 CUSTOMER SPECIFICATION 用户条件书 ASME CODE SEC.Ⅷ DIV. 1 2010 ASME标准2010版本第八章第一部分 DOC. NO. 01-AU-11-01-00 REV.0 文件号： (2) DESIGN PRESSURE 设计压力 INTERNAL 1.0 MPa 内压 (3) DESIGN TEMPERATURE 设计温度 60℃ (4) TYPE OF JOINTS OF CATEGORIES A AND B A、B类焊接接头类型 TYPE NO.1 1号类型 (5) RADIOGRAPHY 射线透照检查 CATEGORY A、B BUTT JOINT SPOT UW-11(b) A、B类焊缝射线抽样检测按 UW-11（b） (6) JOINT EFFICIENCY 焊接接头系数 SHELL AND HEAD:85% 筒体和封头:85% (7) CORROSION ALLOWANCE 腐蚀裕量 1.0mm . (8) MATERIAL 材料 SHELL HEAD:SA-516M Gr.485 筒体和封头:SA-516M Gr.485 NOZZLE: SA-105M 接管：SA-105M FLANGE: SA-105M 法兰：SA-105M LEGS: SA-516M Gr.485 支腿：SA-516M Gr.485 LUG: SA-105M 吊耳: SA-105M (9) MAX. ALLOWABLE STRESS AT DESIGN TEMPERATURE 设计温度下的最大许用应力 SA-516M Gr.485: 138MPa at 60℃ SA-105M: 138MPa at 60℃ (10) MATERIAL UNDERTOLERANCE SHELL AND HEAD 筒体和封头材料的厚度负偏差 0.25mm (11) HEAD TYPE 封头类型 2:1 S.E. (12) TANK CAPACITY 罐容积 4.9 m3 (13) SERVICE FLUID 工作介质 COMPRESSED AIR (no lethal) 压缩空气（非致死） (14) MIN. SERVICE TEMPERATURE 最低操作温度 0℃ at 1.0MPa (15) THE LOADING CONSIDERED IN DESIGNING 设计中所考虑的载荷 SEE TABLE 1-1 见表1-1 (16) TANK DIMENSIONS 容器尺寸 SEE FIG. 1-1 见图1-1 TABLE 1-1 LOADING CONSIDERED IN DESIGNING 表1-1 设计过程中考虑的负载问题 Item 序号 Description 内容 Yes No 1 Internal pressure 内压 [√] [ ] 2 External pressure 外压 [ ] [√] 3 Weight of the vessel 容器重量 [√] [ ] 4 Weight of normal contents under operating conditions (static head) 操作工况下的重量 [√ ] [ ] 5 Weight of normal contents under test conditions (static head) 试验条件下的重量 [√] [ ] 6 Superimposed static reactions from weight of attached equipment 附属设备的重量产生的附加净载 [ ] [√] 7 The attachments of internals 内部构件附属装置 [ ] [√] 8 The attachments of vessel supports (skirt, legs, saddles etc.) 容器支座（裙式，腿式、鞍式支座等） [√] [ ] 9 The attachments of lifting lugs 吊耳 [√ ] [ ] 10 Cyclic and dynamic reactions due to pressure 循环和动态载荷确定压力 [ ] [√] 11 Cyclic and dynamic reactions due to thermal variations 循环和动态载荷导致热变化 [ ] [√] 12 Cyclic and d