PICO384非制冷红外焦平面驱动成像方案研究.PDFVIP

第37 卷 第8 期 红 外 技 术 Vol.37 No.8 2015 年8 月 Infrared Technology Aug. 2015 PICO384 非制冷红外焦平面驱动成像方案研究 胡仕明，陈益新 （南京理工大学电子工程与光电技术学院 南京 210094 ） 摘要：非制冷红外焦平面热像仪可用于将人眼不可见的红外光信号转化为可见光图像，具有无需制 冷、便携式和成本低的优点。对法国ULIS 公司在2012 年推出的带I2C 标准片内接口的 17 m 像元 尺寸型号为PICO384 的非晶硅焦平面探测器进行了驱动成像研究，主要工作包括硬件电路板的设计 和基于FPGA 的驱动成像程序开发，最终达到了预期结果获得了清晰的红外图像。文中详细介绍了 硬件系统的组成，对驱动程序核心模块的设计进行了说明和给出仿真验证结果，并就软硬件设计过 程中的几个重要问题进行了探讨。 关键词：PICO384 ；非制冷；红外焦平面；红外成像 中图分类号：TN215 文献标识码：A 文章编号：1001-8891(2015)08-0680-05 Research on Driving and Imaging Project of PICO384 Uncooled Infrared Detector HU Shi-ming ，CHEN Yi-xin (School of Electronic Engineering Optoecletronic Techniques, Nanjing University of Science and Technology, Nanjing 210094, China) Abstract ：Uncooled infrared focal plane thermal imager can be used to convert the human eye invisible infrared light signals into visible light images which has the advantages of eliminating the need for a cooling system, portable structure and low cost. A research is made on driving and imaging of PICO384 -Si ） infrared detector which is a new product launched by the French company ULIS amorphous silicon （ 2 in 2012 with I C interface and 17 m pixel pitch. The main work includes the hardware design and driver and imaging development based on FPGA, and ultimately achieves the expected goal of obtaining clear infrared images. This paper introduces the constitution of the hardware system in detail. The core module of driver program is described and verified by simulation. And finally several important problems in the process o