GasketChina_ENC(板式换热器垫片材质).pptVIP

Selection – Gasket Use the Gasket Selection Guide for selection of gasket material. Use the Pressure Temperature graph forto find limitations in pressure or temperature for the actual plate and gasket type. ? Alfa Laval Slide * Compatibility to CIP liquidsCIP 液体的兼容性 Most common CIP solutions are: NaOH (or other alkaline detergent) 1 – 2 % NaOH （或其他碱性去污剂）1～2 ％ Nitric acid or phosphoric acid 0.5 – 1.5 % 硝酸或磷酸 0.5~1.5% How does these CIP solutions affect the gaskets? ? Alfa Laval Slide * CIP alkali solution Material NaOH conc. Volume swell (%) 1 week 2 weeks EPDMFF 1 % 2 2 5 % 4 5 NBRFF 1 % 4 5 5 % 3 4 Test temperature: 80 °C ? Alfa Laval Slide * CIP - NaOH Harmless to EPDM and NBR at normal CIP concentrations (1 – 2 %). At higher concentrations, EPDM is superior to NBR ? Alfa Laval Slide * CIP – acid cleaner solution Material Acid conc. Volume swell (%) 22 hrs 1 week 2 weeks EPDMFF H3PO4 1 % 2 NT NT HNO3 0.5 % 3 NT NT HNO3 1 % NT 5 7 HNO3 5 % NT 5 9 NBRFF H3PO4 1 % 5 NT NT HNO3 0.5 % 10 NT NT HNO3 1 % NT 39 47 HNO3 5 % NT Dissolved Dissolved Test temperature: 80 °C NT = Not Tested ? Alfa Laval Slide * CIP acid solutions Nitric acid is harmful for NBR already at normal CIP concentrations and harmless for EPDM 用硝酸CIP对NBR是有害的，EPDM可以 Always minimize concentration and exposure time 用最稀的浓度和最短的时间 Swelling/degradation from nitric acid will deteriorate polymer and result in release of carbon black 由于硝酸引起的瀜胀/退化使橡胶聚合体和碳黑分离 If possible, use phosphoric acid instead of nitric acid. Phosphoric acid is harmless to both NBR and EPDM at normal CIP concentrations 如果可能，用磷酸替代硝酸作为CIP溶液 ? Alfa Laval Slide * ConstructionGasket - advanced sealing system Long lasting gaskets! ...or glue-free gasket that do not mix sealing and fastening function Two component oven- cured epoxy glue “Roof-top”gasket profile Supporting and protecting gasket groove Gasket material from certified suppliers Homogeneous rubber gasket made in one piece ? Alfa Laval S