交直流混合系统的序网络及其在CDSM-MMC.PDFVIP

42 卷 11 期 电 网 技 术 Vol. 42 No. 11 20 18 年11 月 Power System Technology Nov. 2018 文章编号：1000-3673 （20 18）11-3583-11 中图分类号：TM 72 文献标志码：A 学科代码：470 40 交直流混合系统的序网络及其在CDSM-MMC 直流侧短路对交流侧影响分析中的应用 戴志辉，朱惠君，苏怀波，王增平 （河北省分布式储能与微网重点实验室(华北电力大学) ，河北省 保定市 071003 ） Sequence Component Networks in Hybrid AC/DC Power Systems and Its Application in Analysis on Influence of CDSM-MMC DC-Side Short Fault on AC Side DAI Zhihui, ZHU Huijun, SU Huaibo, WANG Zengping (Hebei Key Laboratory of Distributed Energy Storage and Microgrid (North China Electric Power University), Baoding 07 1003, Hebei Province, China) 1 power grid; grounding mode; fault analysis ABSTRACT : In hybrid AC/DC power networks, DC-side (AC-side) faults may affect AC-side (DC-side) electrical 摘要：在交直流混联电网中，直流(交流)侧故障会对交流(直 quantities. Nevertheless, there are still few quantitative 流)侧电气量产生影响，但目前还缺乏一种具备较强普适性 analytical approaches with adaptability to reflect the influence. 的能定量分析这种影响的方法。为此，首先在分析交、直流 Therefore, based on analysis of mapping relation between AC 电气量之间映射关系的基础上，提出了交直流混合系统序分 and DC quantities, the concept and existing conditions of 量网络模型及各序网存在的条件。其中，混合系统的“正序 sequence component network of hybrid AC/DC systems were 网络”反映了交流电气量正序分量与直流系统中直流分量的 proposed. Among them, positive-sequence network showed 映射关系；“负序网络”反映了交流电气量负序分量与直流 mapping relation between conventional positive-sequence 系统中二次谐波分量的映射关系；“零序网络”反映了交流 component in AC-side and DC component in DC-side; 电气量零序分量与直流系统中工频分量的映射关系。其次， negative-sequence network reflected mapping relation between 以光伏直流接入系统为例，利用其序分量