高密度电阻率法的主要装置特点与应用-地球探测与信息技术专业论文.docxVIP

成都 成都理工大学硕士学位论文 I II High density resistivity characteristics and application of the main devices Introduction of the author: Wang Yu Xi, male, was born in February 1985, Chengdu University of Technology where he studied under Professor Lei Wan, in June 2010 he graduated from the Chengdu University of Technology major in Earth Observation and Information Technology and was granted the master degree. Abstract High density resistivity survey in the field of engineering has been more widely used, and with its own characteristics it has achieved good results, in many ways reflects the superiority of conventional electrical. High density resistivity method has a variety of devices, each device has its own characteristics, the situation is different for different devices, in the actual work, must to select the most appropriate device under different circumstances. According to previous experience and many of the experiments, the author found in high density resistivity method the best device is Wenner and dipole, under normal circumstances, the two devices can completely replace a variety of other devices, so this study of these two devices is very significant. The article focuses on high-density resistivity method data collection and the problem of field laid phase, Including pre-test data collection phase, circuit connection, select the survey area, the selection of polar distance, electrode layout, and then Instruction the high density resistivity basic flow of data processing in a relatively brief, Then on all aspects of data processing were more detailed, which consist of removing dead pixel, data stitching, terrain correction, parameter setting, forward, inversion, etc., and data processing details. Then in order to study the two devices to reflect the characteristics of different geological situations, so this article to study the mechanism theory of high density resistivity method, which is calculated using the known model to forward, inversion, and thus infer un