应用LightTools的投影机设计.pptVIP

Digital Projector Design and Analysis Using LightTools? Overview Projector technology (a brief introduction) Modeling sources and reflectors for light engines in LightTools Modeling the unique components for light engines in LightTools LCD DMD Fly’s eye array Integrating Rods X-Prism Dichroic filters Using the graphical output of LightTools Understanding the unique analysis necessary for digital projectors Workshops Projection Illumination Technology What is a Projector? Used mainly to display information from a computer or television signal to a large area or screen Popular technologies include LCD (Liquid Crystal Display), DMD (Digital Micromirror Device), or LCoS (Liquid Crystal on Silicon) Some are polarization-dependent devices Spatial uniformity, luminance, color mixing, color uniformity, and contrast are important issues Typically used with a short arc lamp K?hler Illumination System Entrance pupil fill and size of illumination are tied together Object is uniformly illuminated Lamp is imaged to entrance pupil of projection lens K?hler Illumination System with Intermediate Image Entrance pupil fill is variable Size of illumination is variable Entrance pupil fill and size of illumination are independent Object is uniformly illuminated Lamp is imaged to entrance pupil of projection lens Abbe Illumination System Entrance pupil fill and size of illumination are fixed Object is non-uniformly illuminated Lamp is imaged to screen Illuminator Summary Example: LCD Light Engine Critical Components of LCD Light Engine Fly’s eye lens array Polarization ray tracing and elements Polarizers LCD Dichroic optical coatings X-Prism assembly Example: DMD Light Engine Critical Components of DMD Light Engine DMD Device Integrating Rod UV Filters Color Wheel Example: LCoS Light Engine Critical Components of LCoS Light Engine Polarization-dependent devices Half wave plate LCoS Modulator Optical Coatings Integrating Rod Fly’s Eye Lens Array Modeling the Critical Components of L