ect三维数据可视化研究与设计-计算机软件与理论专业毕业论文.docxVIP

哈尔滨理丁大学工学硕：上学位论文Research 哈尔滨理丁大学工学硕：上学位论文 Research and Design of 3--D Data Field Visualization of ECT Abstract Electrical capacitance tomography(ECq3 is one of Process tomography(PD technique which is based on capacitance sensor,it∞n provide interior behavior 2／3 dimension visualizing information in process equipment such as dosed pipe,vessels and SO Oil in real time．ECT has the advantage ofbeing non-intrusive,fast in response, simple in structme，high safety and low in cost,SO it is one technique which has great developing potential in field of petroleum,chemical engineering and SO on．Based on the research of 3一D dimension data visualization for ECT,this dissertation investigates the improve method’aiming at the problem of 3一D data visualization for ECT，and achieves the algorithm using the Matlab and OpenGL． In the 3-dimension rebuilding process of ECT,because of the limited data detected by the sensor,and the internal and external influence,the 2-dimension image pix is scarcity,and the quality is comparatively not higll enough．At the game time，the 2-dimension image perhaps includes sin西e pix，therefore，the profile can not be trace也and some flow can not be reflected correctly．Firstly,from the perspective of image interpolation,this paper discusses how to complement pix according to the 2-dimension image,and how to improve resolution bel．ween slices using interpolation image method based on distance transform；Secondly,B—Spine curve is utilized for fitting and interpolation for the contour of ECT 2-dimension image,SO that the tracked contour line iS nature and smooth；At last,aiming at the triangular meshes in the 3-D image reconstructed，mesh subdivision is applied to smooth the 3．D surface． We use the methods mentioned above in the analysis of oil-water two-phase flow in circular pip-line．Finish the display of 2一D interpolation image of system, display of fitting contour and simulation of mesh subdivision of 3一D image．The simulator result indicates that these met