光波分复用技术的分析与研究.doc

  1. 1、本文档共29页,可阅读全部内容。
  2. 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
  3. 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  4. 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
光波分复用技术的分析与研究 摘 要 波分复用(WDM)就是将两种以及多种不同波长的光载波信号(携带各种信息)在发送端经由复用器(亦称合波器,Multiplexer)汇合到一起,并耦合至光线路的同一根光纤中进行传输的技术;在接收端,经由解复用器(亦称分波器或称去复用器,Demultiplexer)将各种波长的光载波分离,然后由光接收机作进一步处理以恢复原信号。这种在同一根光纤中同时传输两个或众多不同波长光信号的技术,称为波分复用。面对市场需求的增长,现有通信网络传输能力的不足,需要从多种可以选择的方案中找到最合适且成本较低的解决方法。缓和光纤数量不足存在一种方法就是敷设更多的光纤,但此方法既受到许多物理因素的限制,又不能有效利用光纤带宽。另一种方案是用时分复用(TDM)的做法提高比特率,即便如此,单根光纤的传输容量依然有限,而且传输比特率的提高将受到电子电路物理极限的限制。所以最合适的方案就是波分复用(WDM)技术,WDM系统通过利用已经敷设完成的光纤,使单根光纤的传输容量能够在高速TDM的基础上N倍的增加,充分利用光纤的带宽,解决通信网络传输能力不强的问题,具有光明的发展前景。WDM是一种在光域上的复用技术,形成一个光层的网络既全光网,将是光通讯的最高阶段。 建立一个以WDM和OXC(光交叉连接)为基础的光网络层,实现用户端到端的全光网连接,用一个纯粹的“全光网”消除光电转换的瓶颈将是未来的趋势。现在WDM技术还是基于点到点的方式,但点到点的WDM技术作为全光网通讯的第一步,也是最重要的一步,它的应用和实践对于全光网的发展起到决定性的作用。 关键词: 波分复用;DWDM;IP OVER WDM;光网络 细致一些(进满页) Analysis and Research of optical wavelength division multiplexing technology ABSTRACT Wavelength division multiplexing (WDM) is two and a variety of different wavelengths of light carrier signal (carry various kinds of information) in the transmitter via a multiplexer (also called combiners, Multiplexer) join together, and is coupled to the optical lines of the same optical fiber transmission technology; at the receiving end, the solution multiplexer (also known as the wavelength division multiplexer or demultiplexer, Demultiplexer) optical carrier wavelength of various separation, and then by the optical receiver for further processing to recover the original signal. This in the same optical fiber transmission at the same time two or more different wavelength optical signal technique, called wavelength division multiplexing. In the face of growing demand, insufficient transmission capacity of existing communication network, need to find the best solution and low cost can choose from a variety of schemes. To ease the number of fiber deficiency is a method of laying more fiber, but this method is affected by many physical factors, and can not effectively utilize the bandwidth of optic

文档评论(0)

wyjy + 关注
实名认证
内容提供者

该用户很懒,什么也没介绍

1亿VIP精品文档

相关文档