通风与空调最终调试方案.docVIP

GC4-RDE 通风空调调试方案 Commissioning Plan for Ventilation and Air Conditioning Equipment 根据SPEC号 23 05 93 本次文件提交内容无偏差 According to the SPEC 23 05 93, the submittal has no deviation 目录 Table of Contents 概况 I. Overview 调试工作范围II. Scope of Commissioning 调试内容说明III. Description of Commissioning 执行标准IV. Applied Standards 调试步骤V. Commissioning Procedures 调试结论和报告VI. Commissioning Conclusion and Report 调试组织与部署VII. Commissioning Organization and Deployment 安全措施VIII. Safety Measures 调试必备条件IX. Essential Conditions of Commissioning 一、概况 I. Overview 1、工程概况 Overview 1) 工程名称： Project Name: 2）工程地点： Project Site: 3）建设单位： Owner: Company Limited 4）设计单位： Designer:. 5）监理单位： Supervisor: 6）施工单位： Contractor: 2、工程简介Introduction 二、调试工作范围II. Scope of Commissioning 2.1．本调试工作可分为以下几方面The commissioning is divided into the following parts: ① 各空调箱及通风机单机无负荷试车。 No-load trial run for each single unit of air conditioner case and ventilator. ② 各空调箱及通风机风量、进口静压、出口静压、电流、转速、 电压的测定及所有风机和电机的铭牌参数。 Measurement of blast volume, inlet static pressure, outlet static pressure, current, rotation speed and voltage of each air conditioner case and ventilator. ③ 机械送、排风系统的总风量测定。 Measurement of total blast volume of mechanical air supply and exhaust system. ④ 机械送、排风系统的各风口风量测定、调节。 Measurement and adjustment of blast volume of each tuyere of mechanical air supply and exhaust system. ⑤ 防排烟系统及排油烟机风机总风量及风口风量测定。 Measurement of total blast volume and tuyere blast volume of smoke prevention and exhaust system and oil smoke exhauster fans. 2.2．调试工作的责职 Commissioning Duties ① 空调系统的调试是集业主技术参数的提供合理性，设计的正确与否及设备供应方技术性能，施工的工程质量等均可对系统性能产生一定的影响，调试人员在调试过程中如发现由于上述原因无法进行工作时，应及时向施工单位、业主、总包、监理反映。 Commissioning of the air conditioning system is intended for reasonableness of technical parameters provided by the owner, correctness of design, technical characteristics of equipment supplier and construction quality, which have an impact on performance of the system. The commissioner shall, if finding it impossible to work as a result