开关盖塑料模具设计.docVIP

Ⅰ 摘要 这篇论文是对开关盖的塑料模具设计。塑料模的组成主要为：成型部分，浇注系统，排气系统，推出机构，冷却系统等等。 本文主要通过对此塑件的工艺材料分析，注塑机的选择，分型面的选择，浇注系统、冷却系统和推出机构等方面对模具进行设计加工。在正确分析完塑件的加工成型工艺后，运用UG、CAD软件对模具行分析。此次的塑件采用精度MT14，为一般精度，运用UG/CAD软件设计出整套模具的各个组成部件并完成相关零件的尺寸计算。 关键词：塑料模具、UG、CAD Abstract This paper is the design of plastic mold for the cover of the switch. The main components of the plastic mold are: molding part, pouring system, exhaust system, launch mechanism, cooling system and so on. This paper mainly through the plastic parts of the process of material analysis, injection molding machine choice, the choice of parting surface, gating system, cooling system and the introduction of mechanisms for mold design and processing. In the correct analysis of the plastic parts of the process of processing, the use of CAD, UG and other software on the mold line analysis. The plastic parts with precision MT14, for the general accuracy, the use of UG/CAD software design a set of various components of the mold and the completion of the relevant parts of the size calculation. Key words: plastic mold, UG, CAD 目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc436811248 前 言 PAGEREF _Toc436811248 \h 1 HYPERLINK \l _Toc436811249 1 零件分析 PAGEREF _Toc436811249 \h 2 HYPERLINK \l _Toc436811250 1.1 材料 PAGEREF _Toc436811250 \h 2 HYPERLINK \l _Toc436811251 1.1.1 各类塑料收缩率的指标 PAGEREF _Toc436811251 \h 3 HYPERLINK \l _Toc436811252 1.2 零件材料的选择：ABS PAGEREF _Toc436811252 \h 4 HYPERLINK \l _Toc436811253 1.2.1 ABS塑料主要的性能指标 PAGEREF _Toc436811253 \h 4 HYPERLINK \l _Toc436811254 1.2.2 ABS材料的特性 PAGEREF _Toc436811254 \h 4 HYPERLINK \l _Toc436811255 1.2.3 工艺分析 PAGEREF _Toc436811255 \h 4 HYPERLINK \l _Toc436811256 2 注塑机的选择 PAGEREF _Toc436811256 \h 5 HYPERLINK \l _Toc436811257 2.1 估算塑件体积和质量 PAGEREF _Toc436811257 \h 5 HYPERLINK \l _Toc436811258 2.2 根据估算塑件体积确定注塑机 PAGEREF _Toc436811258 \h 5 HYPERLINK \l _Toc436811259 3 分型面的选择 PAGEREF _Toc436811259 \h 6 HYPERLINK \l _Toc436811260 3.1 分型面的形式 PAGEREF _Toc436811260 \h 6 HYPERLINK \l _Toc436811261