基于ARM单片机牙科椅控制系统的无线脚控的开发.docxVIP

PAGE \* MERGEFORMAT PAGE \* MERGEFORMAT 1 基于ARM单片机牙科椅控制系统的无线脚控的开发 摘要 牙科椅主要是用来做口腔手术和口腔疾病的检查的，脚控是医生用来控制牙科椅进行各种动作以便于医生对病人进行治疗的。目前大多数牙科椅都采用的是电动式的，开关控制和牙科椅大部分是有线连接。但有线连接也有很多不足:拉线布线有时候很麻烦，发生线路故障时，不太好检查出来，如果设备要重新布局，那么线路也需要重新布置，而且线路不能随意移动等。 本课题以ARM单片机无线通讯为基础，设计出一套能够无线通讯的牙科椅脚控系统。其组成部分包括：脚控无线发送部分，用于把脚控开关的信息，通过无线通讯的方式发送出去，牙科椅接收部分，接收脚控部分发送的信息，并执行接收到的信息的命令，亮不同的灯。 本论文还将脚控形式设计出来。将电源，电路板，脚控开关作为一个整体来设计，使其作为一个整体来为系统工作。 经过调试，该系统基本能够达成并实现所需功能。牙科椅能够通过无线通讯的方式，实现无线脚控的功能，提高了牙科椅脚控的便利性。 关键词：牙科椅，脚控，无线通讯，ARM单片机，Keil uVision4 THE DEVELOPMENT OF DENTAL CHAIR CONTROL SYSTEM FOR WIRELESS FOOT CONTROL BASED IN ARM MICROCONTROLLER ABSTRACT Dental chair is mainly used for checking oral surgery and oral disease, foot control is used by doctors to control the dental chair various actions in order to treat a patients doctor. Most are used in the dental chair is electric, mostly wired connection. Wired connection but there are also many deficiencies: Pull wiring sometimes bothersome when a line fault occurs, check it out is not very good, if the device you want to re-layout, you need to rearrange the line, but the line is not free to move and so on. So this topic to ARM-based microcontroller wireless communications, wireless communications can design a dental chair foot control system. Its components include: foot control radio transmitting section for foot switch control information sent by wireless means of communication，dental chair receiving part, receiving information transmitted foot control section, and executes the received command information, different bright lights. The paper also designed foot control form. The power supply circuit board, footswitch as a whole is designed to make the system as a whole to work. ?After commissioning, the system is able to reach and substantially achieve the desired functionality. Dental chair through a wireless means of communication, wireless foot control functions, improve the dental chair foot control convenience. Key words: Dental chair, foot control