基于G-T腔的可调谐色散补偿器件研究-光学工程专业论文.docxVIP

Abstract With the increasing individual bit rate, the dispersion compensation become more and more important. Because of the development of optical communication, the requirement for communication capacity is unlimited, and the channel rate is increased continuously. The loss of fiber is not principal factor that confine the development of optical communication. Dispersion is one of the mainly limited factors to the transmission distance. The technology of dispersion compensation is one of the crucial technologies in the realm of optical fiber communication. In this paper, a tunable dispersion compensator base G-T etalon is be designed. At first this paper analyzes the cause of the fiber dispersion, how is defined. The current international and domestic development and development trend in dispersion compensation is reviewed. Compared with each other, understand the importance of developing tunable dispersion compensator. And then stared with the theory of multi-beam interference, presents the principle of the G-T etalon interferometer and gives the dispersion formula of single-stage G-T etalon interferometer, then analyzes the effect of the structural parameter on the dispersion. After analysis, the compensator based on reflected etalon is designed and realized. The design of the compensator is stated. The impact of parameter of G-T etalon for the dispersion curve is analyzed. Construe the Principle of every element of the compensator carefully. The reasonable structure parameters are choosed and the device is made. Be proved the feasibility of this dispersion compensator by theoretical Analysis above, the laboratory samples has been completed. And in this paper, introduce the various key steps of the laboratory samples in detail. At the same time, test the laboratory samples, and get the actual parameters and curves of the loss and dispersion. With the comparison of the theoretical value, analyze the lack and missing of the tunable dispersion compensa